CRMA4P230AYLT

CRMA4P230AYLT

Relay with Base 4CO 230VAC 6A LED Test Button

Connectwell CRM Series Modular Power Relay with Base 4 Changeover, Input Voltage : 230 V AC, Contact Current Rating :6 AMPS, LED Manual Over Ride (Test Button) Switching Power 1500 VA / 180 W.
Enquire on WhatsApp

Description

Electrical Data

Mechanical Life 2 × 10⁷ Operations
Electrical Life 4 × 10⁵ Operations
Switching Frequency (No Load) 18000 Operations/Hour
Switching Frequency (Full Load) 1800 Operations/Hour
Operate Time ≤ 20 ms
Release Time ≤ 20 ms
Dielectric Strength (Between Open Contact) 1000 V
Dielectric Strength (Between Coil and Contact) 2000 V
Dielectric Strength (Between Poles) 2000 V
Standard IEC 61810-1
Minimum Insulation Resistance 1000 Ω

Coil Data

Product Type Relay Module
Test Button Yes
Status Indication Green LED
Input Voltage Type AC
Input Voltage 230 V
Maximum Coil Resistance 16500 Ω
Must Operate Voltage 184 V
Must Release Voltage 69 V
Maximum Voltage 253 V
Coil Power 1.2 W

Contact Data

Nominal Switching Voltage (AC) 250 VAC
Nominal Switching Voltage (DC) 30 VDC
Switching Power AC 1500 VA
Switching Power DC 180 W
Maximum Contact Resistance ≤ 50 mΩ
Contact Material Ag Alloy
Minimum Switching Current 10 mA

Environmental Data

Storage Temperature -55 to +80 Deg °C
Operating Temperature -55 to +70 Deg °C
Air Pressure 86 to 106 kPa
Shock Resistance Stability: 10G, Destructiveness: 100G
Vibration Resistance 10 to 55 Hz, Double Amplitude: 1.5 mm
Overvoltage Category III
Pollution Degree 3
Housing Material Polyamide
Degree of Protection IP20

Connection Data

Connection Type Screw Clamp
Conductor Cross Section Stranded Min. 0.2 mm²
Conductor Cross Section Stranded Max. 6 mm²
Conductor Cross Section AWG/Kcmil Min. 24 AWG
Conductor Cross Section AWG/Kcmil Max. 10 AWG
Wire Stripping Length 8 mm
Tightening Torque (IEC) 0.4 Nm
Tightening Torque (UL/CSA) 4.5 lb-in
Cart (0 items)